BEE-L Archives

Informed Discussion of Beekeeping Issues and Bee Biology

BEE-L@COMMUNITY.LSOFT.COM

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Transfer-Encoding:
7bit
Sender:
Informed Discussion of Beekeeping Issues and Bee Biology <[log in to unmask]>
Subject:
From:
Bill Truesdell <[log in to unmask]>
Date:
Tue, 16 Oct 2001 09:45:11 -0400
Content-Type:
text/plain; charset=us-ascii
MIME-Version:
1.0
Reply-To:
Informed Discussion of Beekeeping Issues and Bee Biology <[log in to unmask]>
Parts/Attachments:
text/plain (18 lines)
Lloyd Spear wrote:

> My best reply is that the Homosote boards will do no harm and you can use=
>  them if you wish.  HOWEVER, and this is big...do not use them in a manne=
> r that will impede upper ventilation.  If the Homosote boards work to imp=
> ede air movement from inside the hive to the outside, you are likely to w=
> inter poorly.

If you have a bench saw or even a chisel, put a "trough" or notch from
the center of the board (which will be over the hole in the inner cover)
to the notch in the inner cover. My notch is about 3/4 inches wide and
at least 3/8 deep. That way you have both a ventilation hole and a way
for the bees to get to the upper exit. Also remember to move the outer
cover forward to insure the hole is open and accessible.

Bill Truesdell
Bath, ME

ATOM RSS1 RSS2