I HAVE A RADIAL ARM SAW AND HAVE BEEN ABLE TO CLAMP MY WORK PIECE FIRMLY TO
THE TABLE  AT ABOUT 15 DEGREE ANGLE. USING A STANDARD SAW BLADE I START THE
MACHINE WITH THE BLADE  CLEAR OF THE WORK PIECE. I THEN DRAW THE RADIAL HEAD
TOWARDS ME SLOWLY
AND THE BLADE ENGAGES  THE WORK PIECE . IT CUTS OUT THE HAND HOLE QUITE
NEATLY.  IT IS AT BEST CHANCY AS RADIAL ARM SAWS ARE TRICKY BEASTS.HOWEVER
AFTER 20 YEARS OF USING IT I CAN STILL COUNT TO TEN ON FINGERS AND THUMBS.