> The concrete floor that is present in my affair is clean enough to eat
> from - for the moment.
> But seeing as it is not sealed, it would be silly to let the surface
> deteriorate.
> Any advice.
> I definitely do not wish to paint, nor apply a epoxy resin surface.
Glad to see you are settled in Canada after the shift from France. You
could try seamless vinyl but I wonder why you do not wish to use exopy
resin. Here we use two pot epoxy to seal our concrete floors. It is a good
idea to make sure it is acid etched before hand to make sure there are no
calcium deposits to after the finish.
We use a different colour for the undercoat compared to the top coat(s) so
that if the top coat(s) wear the different colour of the undercoat shows
through.
> Another point that comes to mind is how to seal the junction between the
> floor surface and the wall materials?
Here in Australia we are required to have coving on the floor where it meets
the wall. This allows easy cleaning into the corner. If you need to put a
coving strip in you may need to seal the joins with some food grade sealant.
Trevor Weatherhead
AUSTRALIA
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-- Visit www.honeybeeworld.com/BEE-L for rules, FAQ and other info ---
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::