Hi all
Now I am confused...
> The overall height dimension of the deep hive body is
> shown as 9-5/8".
If that is correct and
> the height for the deep frames are 9-1/8".
That makes a half inch gap no matter where in the box the frames are
suspended.
Which figure is wrong?
When I made Langstroth boxes I made the frame rebates 24 mm deep giving 6 mm
below a 9 mm lug and 9 mm above. The frames were 232 mm tall and the boxes
242 mm so there was also 1 mm under the frames.
Production tolerances were + or - 0.1 mm (0.004") Shrinkage was 1 or 2 mm
overall in box height (well seasoned timber) with no measurable shrinkage in
frame sides.
Converting 242 mm to old Imperial we get 9.527" not 9.625"
Regards From:- Dave Cushman, G8MZY
Beekeeping and Bee Breeding, http://website.lineone.net/~dave.cushman
IBList Archives, http://website.lineone.net/~d.cushman