Beeswax in Varnish, wrote Francois e-mail [log in to unmask] My ancestors were wood and metal workers. For Inlay Varnish they used: Ozokerite 17 parts Bees Wax 3 parts Turpentine Oil 15 parts Melt the first two and stir in the turpentine oil. This varnish is applied like a polish and imparts to the wood a dark natural color and a dull luster. Engraving surfaces had to be covered with a dark-colored coating and soft enough to allow the finest lines to be drawn with a needle and easy to remove when finished with oil or turpentine. Using the following formula: Bees Wax 50 parts Syrian Asphalt 20 parts Mastic 25 parts Hope this helps in your quest! [log in to unmask]