Subject: | |
From: | |
Reply To: | |
Date: | Mon, 5 Oct 1998 08:35:27 EDT |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
This message was originally submitted by [log in to unmask] to the BEE-L
list at CNSIBM.ALBANY.EDU. It was edited to improve formatting.
------------------ Original message (ID=111936) (44 lines) --------------------
Date: Mon, 05 Oct 1998 08:21:59 -0400
From: John Wilkerson <[log in to unmask]>
To: "[log in to unmask]" <[log in to unmask]>
Subject:
[log in to unmask] wrote:
> Hi
> John, In
> reading the portion of your letter that's below did you ever try the
> metal frame spacers ?
My hives have no recessed lip for the top bars to rest in. They simply
rest on the top edge of the box and are in turn covered by a piece of
edged plywood to keep the elements out. The Top bars are 1 3/8 inch
exact in width and I place them side by side the length of the hive box.
If I were to use the steel alignment racks, I would have to make a
recessed channel in the hive or shorten the top bars. I have thought
about doing this but decided against it because when the cover is
removed I would then have 15 to 30 open frams of bees looking up
at me. Granted reassembly of the hive would probably be easier, but I
just keep a few hives and find the extra time to not be a problem. I
do this just as a hobby and to help my fruit trees and garden.
> How many T.B.H.'s do you have now ?
This is my first year and am keeping two hives and have an extra that I
will use to raise queens in next year. I might increase the number on
up around 5 but I live in town and don't want problems with the
neighbors. So far they seem to appreciate the bees, but with the rash
of hornet and yellow jacket stings this year I am hesitant to be overly
visable.
> It seems that with proper top bar rotation mites should be kept down
> quite well. Do you do that and if so is this a sound observation?
I do not understand the connection between rotating the combs and mite
control?
John
|
|
|