Subject: | |
From: | |
Reply To: | |
Date: | Wed, 19 Jul 2017 20:24:50 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Before the advent of modern welded rails, sections of rails were joined
together with "joint bars" fastened with large bolts and nuts. "Tail
lock nuts" were an early form of what might now be most commonly called
"lock washers." They were used to try an obviate the constant problem of
the nuts loosening on the track bolts. Without locknuts, the vibration
from passing trains would inevitably cause loosening of the nuts on the
track bolts. Before the common adoption of locknuts (ca 1900) inspecting
for, and re-tightening of, loosened nuts was a constant, frequent and
costly task for railroad trackmen. There were a variety of differing
forms of locknuts introduced in the 1900s in an attempt to obviate this
expense (not to mention the risks from having loose nuts). The "tail"
lock nut was but one form which was adopted; the object of the "tail"
was that it would protrude into the joint between two rail sections and
thus stop the rotation of the nut which had it clamped and fixed into
place on the bolt.
Railroad inspectors reports from ca 1910-1920s are replete with a most
common complaint of finding "loosened nuts on track bolts" and
recommendations that some form of locking nut be installed; it was not
until after WWI that locking nuts had become rather universally employed
by most railroads. Many smaller railroads never adopted them, and
kept-up their age-old maintenance routine of sending trackmen over the
line (daily) to find and tighten nuts.
On 7/19/2017 9:38 AM, Joseph Howell wrote:
> Hello HISTARCH folks,
>
> I am trying identify these metal objects found along an abandoned portion of the Southern Pacific RR. A fairly extensive search has turned up nothing, other than other people who don't know what they are either. We found quite a few of them, usually in association with crosstie plates, rail anchors, and spikes. I'm thinking they are some kind of lock washer. Anyone?
>
> https://drive.google.com/open?id=0B4GzvIWsfmnCUUZGblE1ZUNMb1E
> https://drive.google.com/open?id=0B4GzvIWsfmnCb1BndTJ5RkNXYlE
>
> Thanks!
>
>
> Joseph Howell
> Archaeologist
> Statistical Research, Inc.
> 6099 E. Speedway Boulevard
> Tucson, AZ 85712
> Phone: (520) 721-4309
>
>
> Statistical Research, Inc., is a certified woman-owned small business that has provided Cultural Resource Management and Historic Preservation services since 1983.
>
> This communication is confidential and is intended only for the use of the individual or entity named above. If you have received this communication in error, please immediately destroy it and notify the sender by reply e-mail or by telephone (909) 335-1896 (call collect).
>
|
|
|