Patrick is absolutely correct on Item 3. And, yes, the teeth are riveted on to the bar. I had to deal with these on a daily basis when cutting hay on a ranch in the 1970s. I'm sure they are still used. I looked in my 1902 Sears catalog and there is a small illustration of a horse-drawn one. I can't tell if the mechanism is the same but it looks similar.
The first item looks like a knife (think paring knife size and style) where the (probably wood) handle has deteriorated away.
Harding Polk II
[log in to unmask]
-----Original Message-----
From: Patrick Martin <[log in to unmask]>
To: HISTARCH <[log in to unmask]>
Sent: Tue, Jun 10, 2014 12:15 pm
Subject: Re: Mystery Objects
Dunno about the first two, but the third looks like the cutter bar from a
hay mower..... reciprocates back and forth through a stationary bar with
teeth, lowered from the side of a tractor, driven from the power take off.
Probably lots of them still operating. I remember blade/teeth being
removeable/replaceable, maybe riveted rather than welded in place.
PEMartin
On Tue, Jun 10, 2014 at 2:07 PM, Kenline, Brooke <[log in to unmask]>
wrote:
> Hello everyone-
>
> I need some help identifying these three mystery objects. The context is a
> 19th/20th c. site in Western Maryland with a grist mill, saw mill, and
> several house foundations.
>
> Photos can be found here:
> https://www.flickr.com/photos/101041879@N08/sets/72157644627465467/
>
> Object #1 is an iron alloy object and is approximately 12 cm long (see
> first 2 photos). It was retrieved from a context with lots of nails and
> other miscellaneous hardware.
>
> Object #2 is a lead alloy object measuring 4.06 x 1.72 x 0.28 cm. It has
> two rivets and is crudely made (probably not an ornamental piece such as a
> buckle). Might be something electrical-related?
>
> Object #3 is an iron alloy object that measures approximately 1 m in
> length and has 12 "teeth". The teeth are welded onto the bar, not riveted,
> suggesting a function that wouldn't place too much stress on them (not a
> saw).
>
> Any help would be greatly appreciated! Thanks!
>
>
> Brooke Kenline, MA, RPA
> [log in to unmask]
>
--
*Patrick E. Martin, PhD*
*Professor of Archaeology and ChairPresident, The International Committee
for the Conservation of the Industrial Heritage*
*Department of Social Sciences*
*Michigan Technological University*
*Houghton, MI USA 49931*
*[log in to unmask] <[log in to unmask]>*
*(906) 487-2070*
*www.industrialarchaeology.net
<http://www.industrialarchaeology.net>www.ticcih.org
<http://www.ticcih.org>*
|