HISTARCH Archives

HISTORICAL ARCHAEOLOGY

HISTARCH@COMMUNITY.LSOFT.COM

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
HISTORICAL ARCHAEOLOGY <[log in to unmask]>
Date:
Thu, 12 Jul 2007 13:19:32 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (57 lines)
We have those knurled thumb nuts on the front of the wooden filing
cabinets sitting right next to me.

:-)

Smoke

On 7/12/07, Bob Skiles <[log in to unmask]> wrote:
> Bob is spot-on about #3 ... these knurled thumb-nuts are quite common, outside of the residentially ubiquitous adjustment knobs for clock hands, perhaps most common in making terminations of wires carrying a low-voltage DC electric current on a projecting screw (post). Many early commercial batteries (especially the batteries used for telephones) had precisely this type of terminal for making connections. They were also quite common for making the connections to meters (ohmmeters, ammeters, voltmeters ... such as those used to monitor the condition of batteries) and (perhaps a few years later than your dates) for making connections to the backs of the meters in automotive dashboards. You can see an example of a contemporary voltmeter with this type of terminal here (though the thumbnut is missing on this example, you can clearly see the post where it is supposed to be screwed-on):
>
> http://i15.ebayimg.com/07/i/000/a9/94/7bb9_1.JPG
>
> There is another example here (with the thumb-nuts intact):
>
> http://cgi.ebay.com/W-M-Welch-Vintage-DC-Volt-Amp-Meter_W0QQitemZ190130744466QQihZ009QQcategoryZ50963QQrdZ1QQcmdZViewItem
>
> These were also a quite common termination type on early battery-powered radio sets (you can see a bunch of examples on this very early single-tube radio):
>
> http://cgi.ebay.com/Antique-Battery-Powered-TUBE-RADIO-Stein-MICA-1900s_W0QQitemZ120140885094QQihZ002QQcategoryZ12QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
>
> After WWI, the knurled thumb-nuts used for electrical applications commonly had an exterior surface of bakelite over the brass core (for its insulation protection against inadvertent shorts), like the examples seen here on a common AC/DC power supply used to power the old-style battery-powered radios from household AC current:
>
> http://members.aol.com/delamewes/batelim1.jpg
>
>
>
> From:         "Robert C. Leavitt" <[log in to unmask]>
>
> Doug:  I'll take the obvious.
>
> #3, especially center and right, are knurled thumb screws, used for
> any number of applications where you want a fairly firm hold but
> didn't want to use a tool: electrical connections like for installing
> a battery pack; fastening the cover onto a box (some cars used them
> to fasten the cover on the fuse box, for example);  also used for the
> time-set  adjustment on a wind-up alarm clock.  The center one
> screwed onto a threaded post and would restrict the degree to which
> it could be tightened.  The right one screwed into a threaded hole.
>
>
>
>
> ~~~~~~~~~~~~~
> "There is also an artificial aristocracy founded on wealth and birth, without either virtue or talents ... The artificial aristocracy is a mischievous ingredient in government, and provisions should be made to prevent its ascendancy."
>
> - Thomas Jefferson (1743-1826)


-- 
Smoke Pfeiffer

I have sworn upon the altar of God, eternal hostility against every
form of tyranny over the mind of man.
Thomas Jefferson
(Carved at the base of the dome, interior of the Jefferson Memorial,
Washington, D.C.)

ATOM RSS1 RSS2