Subject: | |
From: | |
Reply To: | |
Date: | Mon, 13 Aug 2007 15:03:01 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
ISEN-ASTC-L is a service of the Association of Science-Technology Centers
Incorporated, a worldwide network of science museums and related institutions.
*****************************************************************************
The engineer interested in generating the vortex has asked me to post
this e-mail to the group.
Michael C. Driver PhD
Director of Information Services
Materials Research Society
724 779 3004 x401
________________________________
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Monday, August 13, 2007 2:59 PM
To: Michael Driver
Subject: Vortex Generation Revision 1
I want to thank those who responded to my first attempt at this problem.
It made me realize that I needed to provide more information & think
about this in other ways I had not done before.
The Children's Museum of Pittsburgh, PA, working with Ned Kahn
wishes to construct a cloud vortex into which the children can walk.
WARM WATER VAPOR CLOUD
Objective:
* To generate a visible warm water vapor cloud.
* The objective of the cloud is to create a raising column of
warm
mist within a tall (about 30') glass sculpture structure.
* The shape of the slotted glass sculpture will generate a vortex
as
the warm cloud rises and pulls air through the slotted sides.
* The cloud must be of a low enough temperature that a person
could stand in it.
* The system wants to be as passive as possible.
* The system wants to be as low maintenance as possible.
Site parameters:
* Park near Children's Museum of Pittsburgh PA
* Weather: Ambient Temp. 0 F to 90 F degrees
Humidity 10% to 95%
(We understand that it may not work in all weather
conditions.)
* A shallow concrete heated vessel below a grating.
Both about 15' in diameter.
The distance between the grating and the vessel could be as
much as 8' to 10'.
(The concrete would be heated to the temperature needed to
create the cloud and prevent it from freezing in the winter.)
* Steam Condensate lines are available near by.
Pressure 7 to 13 PSI
Temp 140F to 160F
Size 6"
Depth 3' to 6'
* Steam lines are also available near by if a higher temperature
is needed.
Questions:
* What are the parameters needed to generate the warm water
vapor cloud?
* What temperature should the concrete vessel be heated to?
* What are the health implications of this installation?
* What should the depth of hot water be?
* What might the evaporation rate be?
(For flow rate of Steam Condensate)
* What distance above the hot water should the grating be in
order to have a safe temperature for the grating (bare feet)
or a person standing in the cloud?
* Should there be make up air brought in below the grating?
How big or how much?
Dennis C. McCarthy R.A.
phone: (412) 341-9277
mobile: (412) 398-0686
[log in to unmask]
240 Woodhaven Drive
Pittsburgh, PA 15228
**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
***********************************************************************
For information about the Association of Science-Technology Centers and the Informal Science Education Network please visit www.astc.org.
Check out the latest case studies and reviews on ExhibitFiles at www.exhibitfiles.org.
The ISEN-ASTC-L email list is powered by LISTSERVR software from L-Soft. To learn more, visit
http://www.lsoft.com/LISTSERV-powered.html.
To remove your e-mail address from the ISEN-ASTC-L list, send the
message SIGNOFF ISEN-ASTC-L in the BODY of a message to
[log in to unmask]
|
|
|