Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Mon, 18 Jul 2005 21:43:03 -0400 |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=us-ascii; format=flowed;
x-avg-checked=avg-ok-55F832A9 |
Reply-To: |
|
Parts/Attachments: |
|
|
> What is the standard size...
>there is a size that uses the most of your
>frame according to the size of the frame
>
Use a thin top bar shallow frame. Either a grooved top bar, or a slotted
top bar. I like slotted, as the foundation is easier to install, the
grooved gives a straighter comb, but foundation must be glued in with
melted beeswax. Kelley has slotted thin top bar frames. Wedge top bars
don't give a wide enough comb to fill the 4 1/8 square cut comb container.
Medium frames are wastful. Install foundation 3/8" from bottom bar. If you
install full sheet, it will sag when drawn, and will give a curved comb.
Cut the comb 4 1/8 x 4 1/8.
I use two sharp, serrated knives. They follow the edge of the
frame, without cutting in. Place them in a pan of hot water on a hot plate.
Use one for a few cuts, and switch. Keep the knives hot.
Mike
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 267.8.16/50 - Release Date: 7/15/2005
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-- Visit www.honeybeeworld.com/BEE-L for rules, FAQ and other info ---
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
|