Subject: | |
From: | |
Reply To: | |
Date: | Thu, 3 Mar 2005 09:01:23 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
HI!
Obviously, one wants to handle excluders as little as possible. Even a
slight bend in the wires can render the device *worse than useless*.
I suppose a solar melter is the best plan, but for those of us with less
than enough sun, especially in winter, I invented an "electric solar
melter".
I took an empty deep super, nailed a piece of plywood on it, and mounted
four heat lamps. I put the waxy queen excluder on a drip board, and place
the heat box over it, with the lamps pointing down.
It takes a minute or two to completely clean the excluder. The wax drips
into the drip board, which has a hole in the rim to let the wax drip into
a bucket.
This year I improved it slightly by fastening the box to the drip board
with hinges, and I tilted it a little to keep the wax from pooling up. I
use this to clean 200 excluders each winter. It requires very little
attention.
I also wired in a wind-up timer on it so that if I forget about it, it
shuts itself off (instead of bursting into flames, which it could do).
pb
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-- Visit www.honeybeeworld.com/BEE-L for rules, FAQ and other info ---
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
|