Laurie pointed out the precision factors for the weighing scale and I also briefly thought ---
is that the conversion? But it is not the conversion factor. The number of grams and
tenths of ounces of precision are merely the lowest potential value that can be measured
with any degree of precision (not accuracy since this requires calibration). If you use the
scale a lot you will notice that it jumps by a factor of 2 for grams and a factor of 1 for
tenths of ounces. If you measure an object that weighs 0.1 oz, it will hover for a while and
settle on either 2 g or 4 g. If you start measuring heavier objects repeatedly, then you will
start to see that the averages of these values will approximate the 35.2 g per ounce. If the
scale had a precision rating of 1 g, you would probably get a value of 3 g. with a few 1 g
and 4 g measurements.
Best, Susan
***********************************************
Archives: http://community.lsoft.com/archives/LACTNET.html
To reach list owners: [log in to unmask]
Mail all list management commands to: [log in to unmask]
COMMANDS:
1. To temporarily stop your subscription write in the body of an email: set lactnet nomail
2. To start it again: set lactnet mail
3. To unsubscribe: unsubscribe lactnet
4. To get a comprehensive list of rules and directions: get lactnet welcome